Technical ArticleHow to Size a Chiller for Injection Molding Machines
Chiller sizing from shot weight, cycle time and mold cooling load. The three-step calculation, plus the safety margins that prevent summer shortfalls.
Engineering intelligence
Knowledge Built for Better Plastic Processing Decisions
Technical guides, product selection methods, project evidence and industry intelligence, reviewed by engineers and organized for real factory decisions.
Start with your production goalThen open the relevant system path
Production questions
Start with the outcome you need
Open a system path based on the production problem, then review the connected equipment families.
Plan a central material systemCoordinate storage, drying, conveying and distribution across multiple machines.
Control material moistureReview drying and dehumidifying options for hygroscopic resins.
Automate material transferPlan a coordinated conveying route for pellets and powders.
Improve recipe consistencyCompare material preparation approaches for dosing and mixing.
Published information
Useful content for real production decisions
Browse each published item by its content type and last-updated date.
119 resources found
Technical Article
Technical ArticleVertical vs Horizontal Color Mixers: Which Blends Better?
Vertical mixers blend fast and empty cleanly; horizontal mixers handle heavy blends. Cycle time, uniformity and where each type actually wins.
Technical ArticleHolding Colour Consistency Across Multiple Machines
Same recipe, different presses, different shade. The five process variables that shift colour between machines, and how to bring them back together.
Technical ArticleSetting Masterbatch Let-Down Ratio Without Streaks
Streaks are usually a mixing and dispersion problem, not a ratio problem. How to set let-down ratio, verify dispersion and fix the four common causes.
Technical ArticleGravimetric vs Volumetric Dosing: Accuracy, Cost and When It Matters
Gravimetric dosing weighs; volumetric dosing measures volume. The accuracy difference decides colour cost, and payback is often under a year.
Technical ArticleGranulator Selection: Screen Size, Rotor Speed and Throughput
Screen size sets regrind particle size, rotor speed sets dust and fines. How to match a granulator to your scrap type and re-feed ratio.
Technical ArticleCabinet Dryer vs Inline Dryer: Batch or Continuous Drying?
Cabinet dryers suit small batches and frequent colour changes; inline dryers suit continuous production. Here is how to choose without buying both.
Technical ArticleHow Regrind Quality Changes Injection Molding Results
Particle size spread, fines, dust and thermal history all change how regrind melts. What to measure and which re-feed ratio actually holds.
Published project records
Review project applications and configurations
Use each published case record to compare application context, equipment configuration and the result reported for that project.
Confirm scope and operating conditions before applying a result to a different production line.
Browse Project Records
